지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET’2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the rvalue distribution.
목차
Abstract
INTRODUCTION
PHENOMENOLOGICAL YIELD FUNCTION
RESULTS AND DISCUSSION
CONCLUSIONS
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Accuracy Analysis of Anisotropic Yield Functions based on the Root-Mean Square Error
기타자료
2010 .06
-
Anisotropic yield function capable of predicting eight ears
기타자료
2011 .08
-
Analysis of Earing in Deep Drawn Cups
기타자료
2010 .06
-
Cup-Drawing Behavior of High-Strength Steel Sheets Containing Different Volume Fractions of Martensite
기타자료
2010 .06
-
Forming Limit Calculation based on the M-K Model with Yld96 yield function
한국자동차공학회 추계학술대회 및 전시회
2009 .11
-
평면이방성 알루미늄 재료의 귀발생 예측에 있어서 항복함수의 초기 Back-Stress의 영향
한국소성가공학회 학술대회 논문집
1998 .05
-
드로잉-아이어닝 공정의 귀생김 예측을 위한 유한요소해석
한국소성가공학회 학술대회 논문집
2012 .05
-
Optimization for determination of yield function coefficients to predict anisotropy of sheet metal
한국소성가공학회 학술대회 논문집
2019 .10
-
Sheet Forming Simulations of Automotive Parts using Different Yield Functions
기타자료
2010 .06
-
Analytical and Numerical Simulation of Deep Drawing and Ironing
기타자료
2011 .08
-
변형률 속도에 따른 고강도 강판의 이방성 변화에 관한 연구
한국소성가공학회 학술대회 논문집
2011 .05
-
알루미늄 판재의 다단계 드로잉에 있어서 원통컵의 치수 정밀도 비교
소성·가공
2015 .04
-
변형률속도에 따른 고강도 강판의 이방성 변화에 관한 연구
소성·가공
2011 .12
-
Thermo-mechanical Forming of Al–Mg–Si Alloys : Modeling and Experiments
기타자료
2010 .06
-
Finite Element Simulation for Earing Prediction with Non-Associated Flow Rule and Evolutionary Anisotropy
한국소성가공학회 학술대회 논문집
2016 .10
-
A General Yield Function within the Framework of Linear Transformations of Stress Tensors for the Description of Plastic-strain-induced Anisotropy
기타자료
2011 .08
-
Numerical simulation of Rectangular Cup using High Strength Steel in Multi-Stage Deep Drawing Process
한국소성가공학회 학술대회 논문집
2013 .05
-
A User-friendly 3D Yield Function for Steel Sheets and Its Application
기타자료
2011 .08
-
Earing Prediction in Cup Drawing using the BBC2008 Yield riterion
기타자료
2011 .08
-
Case Study-Yield Improvement
대한전자공학회 단기강좌
1983 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-003335919