지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
In order to analyze the time-dependent spring-back behavior of the aluminum alloy 6022-T4 sheet, the viscoelastic/plastic constitutive law was applied by utilizing a linear viscoelastic/plastic model previously developed. As for the plastic deformation, the combined isotropic-kinematic hardening law was used to represent the Bauschinger behavior and transient hardening, while a non-quadratic anisotropic yield function, Yld2000-2d, was applied to account for anisotropic yield behavior. The numerical formulation was developed based on the incremental deformation viscoelastic/plasticity theory and then, the constitutive law was implemented into the ABAQUS/Standard commercial finite element program using the user-defined material subroutine, UMAT. The viscoelastic behavior was characterized by the creep test above the initial yield stress level, while anisotropic yielding and hardening parameters were obtained by the uniaxial tensile test. The constitutive law and the formulation were successfully validated for time-dependent springback in the draw-bend test.
목차
Abstract
INTRODUCTION
LINEAR VISCOELASTICITY
HARDENING LAW
NUMERICAL FORMULATION
MATERIAL CHARACTERIZATION
SPRING-BACK IN DRAW-BEND TEST
SUMMARY
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
시간 의존성 구성방정식을 이용한 AA6022-T4 판재의 탄성 복원 예측
소성·가공
2009 .10
-
시간 의존성 구성방정식을 이용한 AA6022-T4판재의 탄성 복원 예측
한국소성가공학회 학술대회 논문집
2009 .05
-
Elasto-Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets and Its Constitutive Modeling
기타자료
2010 .06
-
Two-surface plasticity Model and Its Application to Spring-back Simulation of Automotive Advanced High Strength Steel Sheets
기타자료
2011 .08
-
Springback Prediction in U-draw/bending of DP and TRIP Steel Sheet
한국자동차공학회 춘계학술대회
2011 .05
-
Evaluation of Constitutive Models for Springback Prediction in U-draw/bending of DP and TRIP Steel Sheets
기타자료
2011 .08
-
Modeling of Directional Hardening Based on Non- Associated Flow for Sheet Forming
기타자료
2010 .06
-
하중이력을 고려한 비등방 경화 모델
한국소성가공학회 학술대회 논문집
2012 .05
-
Material Models for Accurate Simulation of Sheet Metal Forming and Springback
기타자료
2010 .06
-
Application of the Laplace transformation for the analysis of viscoelastic composite laminates based on equivalent single-layer theories
International Journal of Aeronautical and Space Sciences
2012 .12
-
Anisotropic-Asymmetric Yield Criterion and Anisotropic Hardening Law for Composite Materials: Theory and Formulations
Fibers and Polymers
2006 .01
-
항복함수 및 경화모델에 따른 DP980 강판의 스프링백 예측
소성·가공
2016 .06
-
Springback FE modeling of titanium alloy tubes bending using various hardening models
Structural engineering and mechanics : An international journal
2015 .01
-
Viscoelastic-Plastic Modeling for Springback of Sheet Metals
한국소성가공학회 학술대회 논문집
2019 .05
-
An Automatic Spring-back Compensation Die Design Method Based on Genetic Algorithm and Isotropic-Kinematic Hardening Laws
기타자료
2011 .08
-
히스테리시스 거동을 하는 탄성체의 비선형 점탄성 구성방정식
대한기계학회 논문집 A권
2016 .04
-
Dynamaic Progressive Failure Analysis of Reinforced Small Embankment Dams by Kinematic Hardening Elasto-plastic Constitutive Model
한국지반신소재학회 학술발표회
2011 .11
-
Implementation of an Evolving non Quadratic Anisotropic Behaviour for the Closed Packed Materials
기타자료
2010 .06
-
2단 인장 실험을 통한 이방성 경화 모델의 평가
소성·가공
2012 .10
-
On Springback Prediction With Special Reference To Constitutive Modeling
기타자료
2010 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-003335606