메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김영석 (한국전기안전공사) 최명일 (한국전기안전공사) 김종민 (한국전기안전공사) 방선배 (한국전기안전공사) 송길목 (한국전기안전공사) 곽동순 (경일대학교)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제62권 제5호
발행연도
2013.5
수록면
643 - 648 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (10)

초록· 키워드

오류제보하기
In this study, degradation was observed by irradiating UV rays to the polymer insulators which have been widely used in outdoor electric power facilities. For an indoor accelerated UV test, 0.55 w/m2 of UV rays were applied using a xenon-arc method. A UV detection system with 65 Ø㎜ in diameter, 100 ㎜ in length and 1.0 of brightness (F/#) has been designed. Even though efflorescence on the surface of polymer insulators wasn"t observed according to the accelerated UV test. UV rays were detected at around 50% and 40% of insulation breakdown in EPDM and silicone-type insulators respectively. As degradation continued because of an indoor accelerated UV test, breakdown voltage with which UV rays can be detected in an early stage decreased as well. A silicone polymer insulator would be severer than EPDM polymer insulator in terms of surface degradation because of UV strength against Vm/VBD was high in silicone polymer insulators. UV strength in silicone-type insulators increased at 1,000 kJ/㎡ because contact angle at the intial stage sharply decreased to from 113° to 92.1°

목차

Abstract
1. 서론
2. 실내 자외선 가속열화 실험
3. 자외선 센서 감지 시스템 구성 및 실험
4. 실험결과 및 검토
5. 결론
References

참고문헌 (11)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-003651601