Two-surface plasticity Model and Its Application to Spring-back Simulation of Automotive Advanced High Strength Steel Sheets

Taejoon Park; Dong-Yoon Seok; Chul-Hwan Lee; Nobuyasu Noma; Toshihiko Kuwabara; Thomas B. Stoughton; Kwansoo Chung

추천

검색

질문

자료유형: 학술대회자료

저자정보: Taejoon Park (Seoul National University) Dong-Yoon Seok (Seoul National University) Chul-Hwan Lee (Seoul National University) Nobuyasu Noma (Tokyo University of Agriculture and Technology) Toshihiko Kuwabara (Tokyo University of Agriculture and Technology) Thomas B. Stoughton (General Motors Global Research and Development Center) Kwansoo Chung (Seoul National University)

저널정보: 한국소성·가공학회 기타자료 The 8th International Conference and Workshop on numerical simulation of 3D seet metal forming processes (NUMISHEET 2011)

발행연도: 2011.8

수록면: 1,175 - 1,183 (9page)

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

A two-surface isotropic-kinematic hardening law was developed based on a two-surface plasticity model previously proposed by Lee et al., (2007, Int. J. Plast. 23, 1189-1212). In order to properly represent the Bauschinger and transient behaviors as well as permanent softening during reverse loading with various pre-strains, both the inner yield surface and the outer bounding surface expand (isotropic hardening) and translate (kinematic hardening) in this two-surface model. As for the permanent softening, both the isotropic hardening and the kinematic hardening evolution of the outer bounding surface were modified by introducing softening parameters. The numerical formulation was also developed based on the incremental plasticity theory and the developed constitutive law was implemented into the commercial finite element program, ABAQUS/Explicit and ABAQUS/Standard using the user-defined material subroutines. In this work, a dual phase (DP) steel was considered as an advanced high strength steel sheet and uni-axial tension tests and uni-axial tension-compression-tension tests were performed for the characterization of the material property. For a validation purpose, the developed two-surface plasticity model was applied to the 2-D draw bending test proposed as a benchmark problem of the NUMISHEET 2011 conference and successfully validated with experiments.

#Isotropic-kinematic hardening #Constitutive behavior #Bauschinger effect #Transient behavior #Permanent softening #Advanced high strength steels(AHSS) #Spring-back

참고문헌 (0)

참고문헌 신청

참고문헌이 DBpia에서 서비스 중이라면, [참고문헌 신청]을 통해 등록해보세요