개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 저널정보
- 한국소성·가공학회 기타자료 The 8th International Conference and Workshop on numerical simulation of 3D seet metal forming processes (NUMISHEET 2011)
- 발행연도
- 2011.8
- 수록면
- 742 - 749 (8page)
이용수
초록· 키워드
오류제보하기
Uniaxial testing is one of the simplest methods used to determining mechanical properties for sheet metals, but the classic test does not determine properties to sufficiently high strain levels for use in models of very large deformations such as forming operations. This limitation is primarily due to the classical test requiring uniform deformation in the gage length. Full-field optical techniques are now being used to extend the applicable strain range of uniaxial testing to strains beyond uniform elongation and well into diffuse necking, but assumptions must be made as to the multi-axial state of stress in this regime. In order to determine if such assumptions are correct, uniaxial experiments are performed combined with a unique combination of digital image correlation to measure plastic strains and stress tensor measurement through X-ray diffraction methods. The combination of metrology permits determination of the true stress-strain response to strains four times uniform elongation and the associated multi-axial stresses at the highest strain levels.
목차
Abstract
INTRODUCTION
EXPERIMENT
RESULTS
CONCLUSIONS
REFERENCES
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0