지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 저널정보
- 한국소성·가공학회 기타자료 The 8th International Conference and Workshop on numerical simulation of 3D seet metal forming processes (NUMISHEET 2011)
- 발행연도
- 2011.8
- 수록면
- 565 - 570 (6page)
이용수
초록· 키워드
오류제보하기
Deformation behavior of cold rolled IF steel sheet (SPCE) under biaxial tension has been investigated for large plastic strain range over 15 %. The test material was bent and TIG welded to form a tubular specimen with an outer diameter of 46.2㎜ and wall thickness of 0.8㎜. The tubular specimens have been subjected to linear stress paths in the first quadrant of stress space with the use of a servo-controlled tension-internal pressure testing machine developed by one of the authors [T. Kuwabara, K. Yoshida, K. Narihara, S. Takahashi, Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure, Int. J. Plasticity 21, 101-117 (2005)]. Moreover, biaxial tensile tests using a cruciform specimen have also been carried out to more precisely measure the deformation behavior for a small strain range following initial yielding. True stress-true plastic strain curves, contours of plastic work in stress space and the directions of plastic strain rates have been measured and compared with those calculated using selected yield functions: the von Mises, Hill’s quadratic and Yld2000-2d [Barlat, F., Brem, J.C., Yoon, J.W., Chung, K., Dick, R.E., Lege, D.J., Pourboghrat, F., Choi, S.H., Chu, E., Plane stress yield function for aluminum alloy sheets - Part 1: Theory. Int. J. Plasticity 19, 1297-1319 (2003)]. The plastic deformation behavior up to a work equivalent plastic strain of ε<SUP>p</SUP>/? = 0.19 has been successfully measured. It is found that the test material exhibits differential hardening and that the Yld2000-2d yield function with an exponent of six most closely predicts the contours of plastic work and the directions of plastic strain rates.
목차
Abstract
INTRODUCTION
EXPERIMENTAL METHOD
RESULTS AND DISCUSSION
CONCLUSIONS
REFERENCES
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0