메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
신동준 (국민대학교) 김윤성 (국민대학교) 김영석 (한국원자력연구원) 김대환 (한국원자력연구원) 김성수 (한국원자력연구원) 남원종 (국민대학교) 최희만 (국민대학교)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2012년도 한국소성가공학회 춘계학술대회 논문집
발행연도
2012.5
수록면
363 - 366 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The thick and thin-plate specimen of 316L austenite stainless steel was charged with hydrogen using a cathodic charging technique. A high temperature homogenization treatment was applied to the thick specimens after hydrogen charging and copper electroplating to remove the hydrogen concentration gradient. For the thin plate, despite the short diffusion distance of hydrogen predicted by the diffusion-controlled model for a semi-infinite, the Vickers hardness measurements revealed the full effect of hydrogen in the center of the cross-sections of thin-plate specimens as well as in the vicinity of the outer surfaces, which appears to be due to the short-circuit diffusion mechanism along the grain boundaries. The room-temperature tensile properties of both undeformed and deformed (20, 40%) samples were examined and compared. Hydrogen softening was apparent in both types of samples. For example, the 40% deformed sample showed an approximately 17 and 7% lower yield and tensile strength, respectively, after hydrogen charging at a strain rate of 2x10?⁴s?¹with a concomitant decrease in ductility compared to that without hydrogen.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-002356898