지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2012.5
- 수록면
- 213 - 217 (5page)
이용수
초록· 키워드
오류제보하기
The focus in the present work is to study, a new type of agro-waste corn husk flour bio-filler as reinforcement for thermoplastic polymers. These materials have been created by extrusion and test specimens were prepared by injection molding. The effect of filler content (10, 20, 30, 40 wt %) and mesh sizes (50~100, 100, 300) on the mechanical properties was studied. Compared with wood flour and rise husk/PLA (30 wt%) and 100 meshes composites. The tensile strength, flexural strength and impat strength showed a decreasing trend with increase in the filler loading and increasing trend with the mesh size. In contrast, enhanced flexural modulus was observed with increasing filler loading and size. It can be concluded, from this study that the used agro-waste materials is an attractive reinforcement in manufacturing green composites from the standpoint of their mechanical properties. Water uptake increases with increasing fiber content.
목차
Abstract
1. Introduction
2. MATERIALS AND METHODS
3. Results and Discussion
4. Conclusions
Acknowledgenments
References
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-000387944