지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.10
- 수록면
- 301 - 308 (8page)
이용수
초록· 키워드
오류제보하기
This study focuses on thermal performance variations according to insulating glazing units and the set point temperature. We used the EnergyPlus rating, which is validated by the U.S. DOE.
The results are as follows:
In the case of a non-extended-type household: (1) The influence of SHGC rather than that of U-factor was found to be relatively high. Therefore the composition of glazing that may maintain SHGC at 0.5 or greater is deemed to be more desirable for energy savings. (2) When the manufacturing method of Low-e glass varies, the influence on the building energy consumption can change. Therefore, the designer is required to understand the composition of glazing in advance at the planning stages of the building. (3) In the case of Low-e insulating glass and Low-e triple glass, almost no difference exists between the influences of such on the energy demands of the building; however, Low-e insulating glass is deemed to be more reasonable from the economical aspect.
In the case of an extended-type household: (1) The entire energy consumption increases in this case as compared with a non-extended-type household (2) In the case where a window faces the outdoor air, unlike a non-extended-type household, the U-factor and SHGC all have great influence on the building energy consumption, and therefore the construction of glazing in consideration of this is desirable.
Lastly, as the set point temperature increases/decreases by 1℃, cooling/heating loads were found to increase/decrease by approximately 16% representing that the change in living patterns greatly influences on the reduction of building energy consumption. Further comprehensive studies on the influence of change in set point temperatures on the consumption of building energy should be conducted based on the expanded scope such as a block, unit complex, or district unit in order to recommend the method for reducing energy in apartment type housing.
The results are as follows:
In the case of a non-extended-type household: (1) The influence of SHGC rather than that of U-factor was found to be relatively high. Therefore the composition of glazing that may maintain SHGC at 0.5 or greater is deemed to be more desirable for energy savings. (2) When the manufacturing method of Low-e glass varies, the influence on the building energy consumption can change. Therefore, the designer is required to understand the composition of glazing in advance at the planning stages of the building. (3) In the case of Low-e insulating glass and Low-e triple glass, almost no difference exists between the influences of such on the energy demands of the building; however, Low-e insulating glass is deemed to be more reasonable from the economical aspect.
In the case of an extended-type household: (1) The entire energy consumption increases in this case as compared with a non-extended-type household (2) In the case where a window faces the outdoor air, unlike a non-extended-type household, the U-factor and SHGC all have great influence on the building energy consumption, and therefore the construction of glazing in consideration of this is desirable.
Lastly, as the set point temperature increases/decreases by 1℃, cooling/heating loads were found to increase/decrease by approximately 16% representing that the change in living patterns greatly influences on the reduction of building energy consumption. Further comprehensive studies on the influence of change in set point temperatures on the consumption of building energy should be conducted based on the expanded scope such as a block, unit complex, or district unit in order to recommend the method for reducing energy in apartment type housing.
목차
Abstract
1. 서론
2. 선행 연구 분석
3. 시뮬레이션 개요
4. Glazing 성능에 따른 시뮬레이션 결과 분석
5. 설정실온에 따른 에너지소요량 분석
6. 결론
참고문헌
참고문헌 (6)
참고문헌 신청
노상태, 정재원. 에너지플러스와 웹기반 공동주택 에너지 평가도구간의 연간난방부하 결과 비교에 관한 연구. 대한건축학회 논문집 - 계획계. 2011
박률, 박종일. 주택 창의 SHGC가 에너지소비에 미치는 영향에 관한 연구. 설비공학논문집. 2010
서혜수, 김병선. 초고층 공동주택의 세대별 냉난방부하 시뮬레이션 결과 및 에너지 실사용량과의 비교 분석. 한국태양에너지학회 논문집. 2011
윤성환, 송수빈, 김영탁, 염성곤. 동적열부하계산을 통한 공동주택 창호 단열사양에 따른 냉난방부하 절감효과 분석. 한국건축친환경설비학회 논문집. 2008
이병호, 이건원, 여영호. BIM기반의 공동주택 주동 유형별 건물에너지 시뮬레이션 비교에 관한 연구. KIEAE Journal. 2010
박률, 박종일. 주택 창의 SHGC가 에너지소비에 미치는 영향에 관한 연구. 설비공학논문집. 2010
서혜수, 김병선. 초고층 공동주택의 세대별 냉난방부하 시뮬레이션 결과 및 에너지 실사용량과의 비교 분석. 한국태양에너지학회 논문집. 2011
윤성환, 송수빈, 김영탁, 염성곤. 동적열부하계산을 통한 공동주택 창호 단열사양에 따른 냉난방부하 절감효과 분석. 한국건축친환경설비학회 논문집. 2008
이병호, 이건원, 여영호. BIM기반의 공동주택 주동 유형별 건물에너지 시뮬레이션 비교에 관한 연구. KIEAE Journal. 2010
이 논문의 저자 정보
이 논문과 함께 이용한 논문
공동주택 주동형태별 세대위치에 따른 일사분석 및 난방부하 절감요소에 관한 연구
김수정
,
박두용
,
김강수
KIEAE Journal
2013
.02
창호의 성능 및 건물의 창면적비에 따른 기존 단독주택의 창호 리모델링 방안 연구
이나은
,
안병립
,
정학근
외 2명
KIEAE Journal
2013
.06
에너지플러스와 웹기반 공동주택 에너지 평가도구간의 연간난방부하 결과 비교에 관한 연구
노상태
,
정재원
대한건축학회 논문집 - 계획계
2011
.01
Glazing 성능과 건물에너지의 상관관계 연구 : 커튼월 건물의 U-value, SHGC 및 VLT를 중심으로
윤재훈
,
홍원화
,
황우진
외 1명
대한건축학회 논문집 - 계획계
2011
.12
주택 창의 SHGC가 에너지소비에 미치는 영향에 관한 연구
박률
,
박종일
설비공학논문집
2010
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-540-001093027