지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.9
- 수록면
- 40 - 46 (7page)
이용수
초록· 키워드
오류제보하기
The single-phase switched reluctance motor(SRM) has only one inductance variation and the positive torque is generated in the restricted section. So, it cannot be started by itself. To solve this problem, many researchers have addressed the several starting method for the single-phase SRM.
This paper is focused on the torque characteristics of the single-phase SRM according to starting method. The four major starting method - permanent magnet, saturable stator pole, to grade the rotor, stepped rotor pole - is selected to analyze the torque characteristics. The analysis model of each starting method is designed to changed the pole shape or inserting other material in the basic model. The torque characteristics of each analysis model is obtained by using FEM analysis. The FEM analysis is performed at incremental rotor positions over half inductance cycle in any one pole with 250AT, 500AT, 750AT. The distortion factor of each analysis model is analyzed through the FFT to compare the distortion between basic model and four analysis model.
This paper is focused on the torque characteristics of the single-phase SRM according to starting method. The four major starting method - permanent magnet, saturable stator pole, to grade the rotor, stepped rotor pole - is selected to analyze the torque characteristics. The analysis model of each starting method is designed to changed the pole shape or inserting other material in the basic model. The torque characteristics of each analysis model is obtained by using FEM analysis. The FEM analysis is performed at incremental rotor positions over half inductance cycle in any one pole with 250AT, 500AT, 750AT. The distortion factor of each analysis model is analyzed through the FFT to compare the distortion between basic model and four analysis model.
목차
Abstract
1. 서론
2. 기동장치의 필요성
3. 해석모델 선정
4. 각 기동방법에 따른 토크특성
5. 결론
References
참고문헌 (8)
참고문헌 신청
1. [학술대회논문] - H.R. Bolton / 1979 / Low Cost Reluctance Drive System for Low Power, Low Speed Application / Proceedings of IEE Conference on Variable Speed Drives : 88 ~ 92
2. [학술지(정기간행물)] - C.C. Chan / 1987 / Low-Cost Electronic-Controlled Variable- Speed Reluctance Motors / IEEE Transactions on Industrial Electronics 34 (1) : 95 ~ 100
3. [학술지(정기간행물)] - Jun-Young Lim / 2001 / Single Phase Switched Reluctance Motor for Vacuum Cleaner / ISIE2001 2 : 1393 ~ 1400
4. [학술지(정기간행물)] - Lee J.H. / 1999 / Manufacturing Prototype and Characteristics Analysis of Disk type Single Phase SRM by 3D Finite Element Method / The Transactions of KIEE 48 (6) : 316 ~ 321
5. [학술대회논문] - R. Krishnan / 2001 / A Novel Single-Phase Switched Reluctance Motor Drive System / The 27th Annual Conference of the IEEE Industrial Electronics Society : 1488 ~ 1493
2. [학술지(정기간행물)] - C.C. Chan / 1987 / Low-Cost Electronic-Controlled Variable- Speed Reluctance Motors / IEEE Transactions on Industrial Electronics 34 (1) : 95 ~ 100
3. [학술지(정기간행물)] - Jun-Young Lim / 2001 / Single Phase Switched Reluctance Motor for Vacuum Cleaner / ISIE2001 2 : 1393 ~ 1400
4. [학술지(정기간행물)] - Lee J.H. / 1999 / Manufacturing Prototype and Characteristics Analysis of Disk type Single Phase SRM by 3D Finite Element Method / The Transactions of KIEE 48 (6) : 316 ~ 321
5. [학술대회논문] - R. Krishnan / 2001 / A Novel Single-Phase Switched Reluctance Motor Drive System / The 27th Annual Conference of the IEEE Industrial Electronics Society : 1488 ~ 1493
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Design and Analysis of a Novel 16/10 Segmented Rotor SRM for 60V Belt-Driven Starter Generator
Xiaodong Sun
,
Zhengwang Xue
,
Shouyi Han
외 3명
Journal of Magnetics
2016
.09
IPMSM의 정토크 특성 향상 및 가진력 최소화를 위한 회전자 형상 최적화
조규원
,
지승훈
,
박경원
외 2명
전기학회논문지
2012
.01
SRM 고정자와 회전자 중첩에 따른 인덕턴스 계산
최경호
,
백원식
,
김동희
외 1명
대한전기학회 학술대회 논문집
2001
.07
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-565-001139972