메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Jong-Ho Sun (Korea Electrotechnology Research Institute (KERI)) Young-Woo Youn (Korea Electrotechnology Research Institute (KERI)) Don-Ha Hwang (Korea Electrotechnology Research Institute (KERI)) Sang-Hwa Yi (Korea Electrotechnology Research Institute (KERI)) Dong-Sik Kang (Korea Electrotechnology Research Institute (KERI),)
저널정보
대한전기학회 Journal of Electrical Engineering & Technology Journal of Electrical Engineering & Technology Vol.7 No.6
발행연도
2012.11
수록면
959 - 964 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Internal pressure of vacuum interrupter (VI) is one of the most important parameters in VI operation and may increase due to the outgassing from the materials inside VI or gas permeation through metal flange or ceramic vessel. The increase of the pressure above a certain level leads to the failures of switching or insulation. Therefore, an effective pressure check of VI is essential and an analysis of partial discharge (PD) characteristics is an effective monitoring method to identify the degree of the internal pressure of VI. This paper introduces a research work on monitoring the internal pressure of VI by analyzing PDs which were measured using a capacitive PD coupler. The authorshave developed cost effective capacitive coupler based on the ceramic material that has an excellent insulation properties and the main component of the capacitive coupler is made by SrTiO3. Detectable internal pressure range and distinguishability of the internal pressure of VI were investigated. From the PD tests results, the internal pressure range, from 10<SUP>-2</SUP> torr to 500 torr, can be monitored by PD measurements using the capacitive coupler and PD inception voltage (PDIV) follows the Paschen’s law. In addition, rise time of PD pulse at 13.2kV decreases with the increase of the internal pressure of VI.

목차

Abstract
1. Introduction
2. Specification of capacitive coupler PD sensor
3. Voltage distribution in VI
4. Partial discharge tests
5. Conclusion
References

참고문헌 (7)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-560-001142709