지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한전기학회 Journal of Electrical Engineering & Technology Journal of Electrical Engineering & Technology Vol.7 No.6
- 발행연도
- 2012.11
- 수록면
- 845 - 851 (7page)
이용수
초록· 키워드
오류제보하기
Power system loads have a significant impact on a system. Although it is difficult to precisely describe loads in a mathematical model, accurately modeling them is important for a system analysis. The traditional load modeling method is based on the load components of a bus. Recently, the load modeling method based on measurements from a system has been introduced and developed by researchers. The two major components of a load modeling problem are determining the mathematical model for the target system and estimating the parameters of the determined model. We use the composite load model, which has both static and dynamic load characteristics. The ZIP model and the induction motor model are used for the static and dynamic load models, respectively. In this work, we propose the measurement-based parameter estimation method for the composite load model. The test system and related measurements are obtained using transient security assessment tool(TSAT) simulation program and PSS/E. The parameter estimation is then verified using these measurements. Cases are tested and verified using the sample system and its related measurements.
목차
Abstract
1. Introduction
2. The Composite Load Model
3. The Parameter Estimation
4. The Developed Program Summary
5. The Case Study
6. Conclusion
References
참고문헌 (14)
참고문헌 신청
Jin Ma / 2006 / Load Modeling by Finding Support Vectors of Load Data from Field Measurement / IEEE Trans. Power Systems 21(2):726~735
He Renmu / 1992 / Composite Load Modeling via Measurement Approach / IEEE Trans. Power Systems 21(2):663~671
W. -S. Kao / 1994 / Comparison of simulated power system dynamics applying various load models with actual recorded data / IEEE Trans. Power Systems 9(1):248~254
Ma Jin / 2007 / Measurement-based Load Modeling; Theory an Applications / Sci. China Ser E-Tech Sci. 50(5):606~617
EPRI Technical Report / 2006 / Measurement-based Load Modeling
He Renmu / 1992 / Composite Load Modeling via Measurement Approach / IEEE Trans. Power Systems 21(2):663~671
W. -S. Kao / 1994 / Comparison of simulated power system dynamics applying various load models with actual recorded data / IEEE Trans. Power Systems 9(1):248~254
Ma Jin / 2007 / Measurement-based Load Modeling; Theory an Applications / Sci. China Ser E-Tech Sci. 50(5):606~617
EPRI Technical Report / 2006 / Measurement-based Load Modeling
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-560-001142547