메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이상섭 (한국건설기술연구원) 홍성엽 (한국건설기술연구원) 박금성 (한국건설기술연구원) 배규웅 (한국건설기술연구원)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第28 第8號
발행연도
2012.8
수록면
61 - 68 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The composite interface should be able to transfer the horizontal shear force to possess the efficiency of a monolithic member for the composite floor with HCS(Hollow Core Slab). This research is about the horizontal shear capacity on the stripe-type and grid-type surface roughness of HCS. 20 specimens for each type were tested in single shear and double shear method. As the results of stripe-type tested in single shear method is larger than the results of grid-type tested in double shear method, it is found that the single shear test is a desirable method to evaluate the horizontal shear capacity in the interface between HCS and topping concrete. The horizontal shear stresses range 0.85~2.88N/㎟ and 0.86~3.80N/㎟ in stripe-type and grid-type interface separately. The horizontal design shear stresses are analyzed with a probability density function called the Weibull function. The characteristic strengths corresponding to the 5% fractile are 0.73N/㎟ and 0.95N/㎟ on the stripe-type and the grid-type respectively, which are 1.3 and 1.7 times larger than 0.56N/㎟ of horizontal shear capacity prescribed by KCI(2007) and ACI(2008).

목차

Abstract
1. 서론
2. 수평 전단 강도의 설계 기준
3. 코터형 표면 처리에 대한 수평전단강도 실험
4. 설계용 수평전단응력의 평가
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-003336581