지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure.
Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part"s shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.
Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part"s shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.
목차
ABSTRACT
1. 서론
2. 컷팅 공구의 설계
3. 컷팅 공구의 해석
4. 결론
참고문헌
참고문헌 (8)
참고문헌 신청
1. [학술대회논문] - Fujikura, R / 2002 / High Pin-Count Ultrasonic Flip-Chip Bonding and Plasma Cleaning Technology / Proceedings of 9th annual KGD Workshop
2. [학술지(정기간행물)] - Jeong, H. S / 1997 / Fundamentals of Ultrasonic Welding / Journal of the Korean Welding and Joining Society 15 (6) : 24 ~ 31
3. [학위논문] - McCulloch, E / 2008 / Experimental and Finite Element Modelling of Ultrasonic Cutting of Food / 석사 / University of Glasgow
4. [학술지(정기간행물)] - Amin, S. G / 1995 / Computer-aided design of Acoustic Horns for Ultrasonic Machining using Finite-element analysis / Journal of Materials Processing Technology 55 : 254 ~ 260
5. [단행본] - Rao, S. S / 2004 / MECHANICAL VIBRATIONS 4th Edition / MECHANICAL VIBRATIONS 4th Edition : 623 ~ 624
2. [학술지(정기간행물)] - Jeong, H. S / 1997 / Fundamentals of Ultrasonic Welding / Journal of the Korean Welding and Joining Society 15 (6) : 24 ~ 31
3. [학위논문] - McCulloch, E / 2008 / Experimental and Finite Element Modelling of Ultrasonic Cutting of Food / 석사 / University of Glasgow
4. [학술지(정기간행물)] - Amin, S. G / 1995 / Computer-aided design of Acoustic Horns for Ultrasonic Machining using Finite-element analysis / Journal of Materials Processing Technology 55 : 254 ~ 260
5. [단행본] - Rao, S. S / 2004 / MECHANICAL VIBRATIONS 4th Edition / MECHANICAL VIBRATIONS 4th Edition : 623 ~ 624
이 논문의 저자 정보
이 논문과 함께 이용한 논문
초음파 컷팅용 Tool의 설계 및 해석
박우열
,
장호수
,
박동삼
대한기계학회 춘추학술대회
2011
.11
초음파를 이용한 컷팅 Tool의 해석
장호수
,
박우열
,
박동삼
대한기계학회 춘추학술대회
2011
.11
40kHz 초음파 커팅용 혼의 설계와 크랙발생에 대한 고찰
서정석
,
이윤정
,
백시영
외 1명
한국생산제조학회지
2012
.10
40㎑ 급 초음파 금속 용착용 공구혼의 설계 및 해석
이승욱
,
문지훈
,
홍상휘
외 1명
대한기계학회 춘추학술대회
2014
.04
초음파 혼의 Tip 면적과 Cu 박판의 용착성
장호수
,
강은지
,
박동삼
한국생산제조학회지
2014
.04
최근 본 자료
댓글(0)
0