지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2012.5
- 수록면
- 101 - 107 (7page)
이용수
초록· 키워드
오류제보하기
Recycling process of melted resin after the injection molding is getting popularto reduce the waste of material. It uses two rollers to make the remaining resin into plastic panels. Analysin the thermal/fluid behaviour of the melted resin is important in the roller process. For this the flow analysis of the gravity driven resin has been done between the rotating rollers with constant speed. The temperature of the roller surface which was contacted with resin and the ambient air cyclically was obtained and it was used as the thermal boundary conditions for the thermal behaviour of the resin. The obtained steady-state results showed a reverse flow in the central part in between the rollers. The temperature of the plastic surface was reduced sharply to the one of the roller surface after it was temperature change was slow inner part of the resin due to the phase changing process.
목차
1. 서론
2. CFD 해석 모델 및 조건
3. 결과 및 고찰
4. 결론
후기
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-422-002847815