메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
노삼영 (한양대학교) 김형근 (SH공사도시연구소) 이준호 (한양대학교) 조민주 (한양대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第28 第3號
발행연도
2012.3
수록면
3 - 14 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this research is to obtain development length and bond slip relationship of the untensioned wire strand, applied to the precast concrete beam-column joint system developed recently. For this the pull-out tests were performed, in which the main test parameters are diameter of strands (9.3㎜, 12.7㎜, bundle), embedment length and distance from the precast concrete surface to the strand. A estimation equation of the development length was proposed based on test result. Herein 5% fractil value with 90% reliability was considered. The development length estimated by the proposed equation is comparable with that of the untensioned wire strand suggested in CEP-FIP Model Code 1990. Half-Precast concrete and topping concrete interface was proposed as an additional new bond condition for the strand location coefficient ŋ₂ in the equation of MC-90. Additionally a bond stress-slip model was established by means of a numerical algorithm applying the strand strain obtained from the pullout tests mentioned above. The development length obtained by numerical analysis using this bond-slip model agrees with the test result. This shows the validity of the bond-slip model developed in this research.

목차

Abstract
1. 서론
2. 기존 연구에 대한 고찰
3. 연구방법
4. 부착응력-슬립 및 정착길이 산정 알고리즘
5. Half-PC내 비인장 강연선의 정착길이 및 부착성능 평가
6. 부착응력-슬립 모델을 적용한 정착길이 산정
7. 기존 연구와의 비교
8. 통계적 방법을 적용한 정착길이 산정식
9. 결론
참고문헌

참고문헌 (15)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-001692542