1%, 2%, 및 10%의 가교도를 가진 cryptand 수지들은 클로로메틸화된 스틸렌(위험물)-1, 4-디비닐 벤젠에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 합성하였으며, 이들 수지로부터 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수 크기에 따른 금속 이온들의 흡착 및 분리특성을 조사하였다. 금속 이온들은 pH 3 이상에서는 큰 흡착률을 보였으며, 금속 이온들의 흡착 평형시간은 약 2시간 이었다. 에탄올에서의 흡착 선택성은 UO₂²? > Ca²? > Ho³? 이었고, 흡착력은 1%, 2%, 10%의 가교도 순 이었으며, 용매의 유전상수 크기에 반비례하였다. 한편, 1% 가교도를 가진 수지에 우라늄, 칼슘, 홀뮴 혼합용액을 흡착시켜 관에 넣고 질산(pH 2.0) 용리액을 사용하여 개별분리 하였다.
Cryptand resins of 1%, 2% and 10% crosslinkage with 1-aza-15-crown-5 macrocyclic ligand attached to chloromethylated styrene (a hazardous material)-1, 4- divinylbenzene (DVB) by substitution reaction were synthesized. The effect of pH, time, dielectric constant of solvent and crosslinkage density of the matrix on the adsorption and separation for metal ions was investigated. The metal ions were not adsorbed on the resins below pH 2 but above pH 3 fast adsorption behavior was showed. The optimum equilibrium time for adsorption of metallic ions was two hours. The adsorption selectivity determined in ethanol was in increasing order UO22+ > Ca2+ > Ho3+. The adsorption power was in the order of 1%, 2% and 10% -crosslinkage resin, but adsorption properties of resins decreased in proportion to the order of dielectric constant of solvents used. In addition, these metal ions could be separated in the column with 1% crosslinkage resin using nitric acid (pH 2.0) as an eluent.