지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This study was conducted in order to investigate the effect of Volatile Organic Compound emissions in various processes at several manufacture’s sites.
The results are as follows :
1. The consuming amount of Stylene, Methanol and Acetone showed relatively higher level at chemical manufacture’s sites.
2. For consumption 691 ㎏/month of Varnish per month, Volatile Organic Compound emissions are calculated as 399 ㎏/month.
3. Emission factors are frequently the best or only method available for estimating emissions, in spite of their limitations.
4. In conclusion, control equipment such as solvent recovery device should be installed in order to minimize Volatile Organic Compound emissions in various processes. It is also necessary too set up Volatile Organic Compound emission standard or operation guideline for each source. Many ventilation systems do not work properly. Problems such as loose fan belts, dirty filters, plugged ducts or dirty fan blades can be easily fixed. Hood problems cause excessively high contaminant levels in the workroom. Situations where airflow into hoods does not meet design criteria are covered under fan or systems problems.
The results are as follows :
1. The consuming amount of Stylene, Methanol and Acetone showed relatively higher level at chemical manufacture’s sites.
2. For consumption 691 ㎏/month of Varnish per month, Volatile Organic Compound emissions are calculated as 399 ㎏/month.
3. Emission factors are frequently the best or only method available for estimating emissions, in spite of their limitations.
4. In conclusion, control equipment such as solvent recovery device should be installed in order to minimize Volatile Organic Compound emissions in various processes. It is also necessary too set up Volatile Organic Compound emission standard or operation guideline for each source. Many ventilation systems do not work properly. Problems such as loose fan belts, dirty filters, plugged ducts or dirty fan blades can be easily fixed. Hood problems cause excessively high contaminant levels in the workroom. Situations where airflow into hoods does not meet design criteria are covered under fan or systems problems.
목차
Abstract
Ⅰ. 서론
Ⅱ. 연구방법
Ⅲ. 연구결과 및 고찰
Ⅳ. 결론
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
유해물질 제거를 위한 국소배기장치 후드의 흡입력 증가에 관한 연구
양호동
,
김영선
,
오율권
대한기계학회 춘추학술대회
2007
.05
국소배기장치설계ㆍ시공ㆍ운전시 유의사항
김부열
대한설비공학회 강연회 및 기타간행물
2001
.11
환기 성능 향상을 위한 횡류팬을 이용한 덕트 형상의 최적화
이상혁
,
권오준
,
허남건
한국유체기계학회 논문집
2013
.02
전자산업에서의 초순수 처리공정
이영은
대한설비공학회 강연회 및 기타간행물
1986
.05
Visualization of Flow Patterns in Cooling and Freezing Processes of Water Around Two Horizontal Tubes
Aki
,
a Na
,
umi
외 4명
International Symposium on Transport Phenomena in Thermal Engineering
1993
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-539-001612014