메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
남기우 (부경대하교) 김정량 (부경대하교) 최창민 (부경대하교)
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제25권 제6호
발행연도
2011.12
수록면
56 - 59 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therifore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt. % + Urethane 13 wt. % + Ti amorphous 0.5 wt. %; LR-0727(1)) was used to evaluate the corrosian resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at 120-210 ℃ for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of 150 ℃, but no vestiges were found over 160 ℃. The specimens with heat treatment at 160 ℃ or nwre did not experience delamination. From these results, it is considEred that the temperature limit for optimum heat treatment is 160 ℃ considering energy efficiency.

목차

ABSTRACT
1. 실험
2. 재료 및 실험 방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (17)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-559-001436149