지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.11
- 수록면
- 364 - 369 (6page)
이용수
초록· 키워드
오류제보하기
Recently,thecases of BIPV(Building-integrated Photovoltaic) have been increased with interest in renewable energy application for buildings. PV System in building can perform a variety of roles as an energy supplier, exterior materials, aesthetic element and etc.
Toapply PV modulesin buildings,various factors should be considered,such as the installation angleand orientation of PV module, shading, and temperature.The temperature of PV modules that are attached to building surfaces especially is one of the most important factors, as it affects both the electrical efficiency of a PV module and the energy load in a building. BIPV modules designed as finished material for spandrels are presented in this paper.
The purpose of this study is to analysis on the thermal performance characteristics of BIPV modules. This study dealt with different types of BIPV modules depending on the backside material, such as clear glass and backsheet.
The analysis of monitoring data shows that thePV module temperature was closely related to the solar radiation on the BIPV module surface, and the BIPV used at the backside also had an effect on the PV module temperature that in turn determines its thermal performance.
Toapply PV modulesin buildings,various factors should be considered,such as the installation angleand orientation of PV module, shading, and temperature.The temperature of PV modules that are attached to building surfaces especially is one of the most important factors, as it affects both the electrical efficiency of a PV module and the energy load in a building. BIPV modules designed as finished material for spandrels are presented in this paper.
The purpose of this study is to analysis on the thermal performance characteristics of BIPV modules. This study dealt with different types of BIPV modules depending on the backside material, such as clear glass and backsheet.
The analysis of monitoring data shows that thePV module temperature was closely related to the solar radiation on the BIPV module surface, and the BIPV used at the backside also had an effect on the PV module temperature that in turn determines its thermal performance.
목차
Abstract
1. 서론
2. 실험 개요
3. 실험 방법
4. 실험 결과
5. 결론
후기
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
한국의 건물일체형 태양광발전(BIPV) 설치 사례 분석
김하련
,
박경은
,
권오은
외 3명
대한전기학회 학술대회 논문집
2010
.07
Small-scale solar photovoltaic policy in Seoul : Identification of limitations and alternative approaches
Junhan Kim
한국신·재생에너지학회 학술대회 초록집
2015
.11
BIPV 응용을 위한 플렉서블 Cu(In,Ga)Se₂ 박막태양전지의 연구현황 및 전망
신동협
,
김기환
,
조준식
외 7명
한국태양광발전학회지
2017
.12
환기 유무에 따른 CIGS BIPV 커튼월 유닛의 성능 비교 분석
김상명
,
김진희
,
김준태
한국태양에너지학회 논문집
2017
.04
BIPV 조합형 패시브환기외피의 모듈온도에 따른 부재성능 분석에 관한 연구
김상우
,
윤성환
대한건축학회 논문집 - 구조계
2017
.02
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-563-001383183