메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이정훈 (원광대학교) 진범수 (원광대학교) 신용덕 (원광대학교)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제60권 제11호
발행연도
2011.11
수록면
2,083 - 2,087 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The SiC-ZrB<sub>2</sub>composites were produced by subjecting a 40:60 vol.% mixture of zirconium diboride(ZrB<sub>2</sub>powder and β-silicon carbide (SiC) matrix to spark plasma sintering(SPS). Sintering was carried out for 60sec at 1400℃ (designation as TP145 and TP146), 1500℃(designation as TP155 and TP156) and uniaxial pressure 50MPa , 60MP under argon atmosphere. The physical, electrical, and mechanical properties of the SiC-ZrB<sub>2</sub>composites were examined. The relative density of TP145, TP146, TP155 and TP156 were 94.75%, 94.13%, 97.88% and 95.80%, respectively. Reactions between β-SiC and ZrB<sub>2</sub> were not observed via x-ray diffraction (hereafter, XRD) analysis. The flexural strength, 306.23MPa of TP156 was higher than that, 279.42MPa of TP146 at room temperature, but lower than that, 392.30MPa of TP155. The properties of a SiC-ZrB<sub>2</sub> composites through SPS under argon atmosphere were positive temperature coefficient resistance (hereafter, PTCR) in the range from 25℃ to 500℃. The electrical resistivities of TP145, TP146, TP155 and TP156 were 6.75×10<sup>-4</sup>, 7.22×10<sup>-4</sup>, 6.17×10<sup>-4</sup> and 6.71×10<sup>-4</sup>Ω·cm at 25℃, respectively. The densification of a SiC-ZrB<sub>2</sub> composite through hot pressing depend on the sintering temperature and pressure. However, it is convinced that the densification of a SiC-ZrB<sub>2</sub> composite do not depend on sintering pressure under SPS.

목차

Abstract
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
참고문헌
저자소개

참고문헌 (19)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-560-000938492