지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
In this paper, we reviewed the spindle system’s motor and bearing and its mode safety for optimal design of a high speed spindle system that exceeds DmN value of 1,500,000. We could verify that it has a separation margin during critical speed by performing critical speed analysis. Also, we have selected an optimal sensoring installation location and actually manufactured & installed the sensor by identifying the stress concentration position in the axial load through finite element analysis to install the built-in piezo electric type load sensor to the spindle housing that can measure and monitor the machining load during high speed rotation of the spindle.
Reproducibility is also verified by calibrating the error through the sensor's sensitivity adjustment after comparing the output between the plate dynamoneters and the load sensor to confirm the reproducibility of the load sensor.
Reproducibility is also verified by calibrating the error through the sensor's sensitivity adjustment after comparing the output between the plate dynamoneters and the load sensor to confirm the reproducibility of the load sensor.
목차
ABSTRACT
1. 서론
2. 고속 주축시스템 설계
3. 로터-다이나믹 해석
3. 센서링 시스템
4. 결론
후기
참고문헌
참고문헌 (10)
참고문헌 신청
1. [보고서] - 지식경제부 생산시스템 전략기술지원단 / 2008 / IT 부품가공용 유연성 머시닝센터 : 37 ~ 48
2. [학술대회논문] - C.H Park / 2009 / Design technique of high speed spindle system for mold machining / KSMPE Spring Conference : 85 ~ 90
3. [기타자료] - H.J. Choi / 2008 / Development of High-Speed and Intelligent Machine Tools used for Cutting Mold / Daegu Machinery Institute of Components & Materials
4. [학술지(정기간행물)] - Yuzhong Cao / 2004 / A General Method for the Modeling of Spindle-Bearing Systems / Journal of Mechanical Design, ASME 126 : 1089 ~ 1102
5. [학술지(정기간행물)] - A. kirchheim / 2009 / Cutting Force Monitoring with Spindle Integrated Force Sensors / Kistler Instrumente AG Winterthur 20 (209) : 1 ~ 5
2. [학술대회논문] - C.H Park / 2009 / Design technique of high speed spindle system for mold machining / KSMPE Spring Conference : 85 ~ 90
3. [기타자료] - H.J. Choi / 2008 / Development of High-Speed and Intelligent Machine Tools used for Cutting Mold / Daegu Machinery Institute of Components & Materials
4. [학술지(정기간행물)] - Yuzhong Cao / 2004 / A General Method for the Modeling of Spindle-Bearing Systems / Journal of Mechanical Design, ASME 126 : 1089 ~ 1102
5. [학술지(정기간행물)] - A. kirchheim / 2009 / Cutting Force Monitoring with Spindle Integrated Force Sensors / Kistler Instrumente AG Winterthur 20 (209) : 1 ~ 5
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-581-000830374