지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.10
- 수록면
- 443 - 453 (11page)
이용수
초록· 키워드
오류제보하기
This study was carried out in order to elucidate effects of types of binder used in pre-coated layer on optical properties and printability of top-coated layer. Coated papers with four different types of SB latex were prepared. Tg, particle size and gel contents of latices were of different. Optical properties and printability of coated paper including print mottle were evaluated.
It was confirmed that properties of pre-coated layer distinctively affected final properties of top-coated layer. Tg was found to be the most influencing factor on the print mottle of coated paper: the SB latex with lower Tg and higher particle size resulted in a superior print mottle.
These results indicate that final printability and properties of top-coated layer can be controlled by adjusting pre-coated layer.
It was confirmed that properties of pre-coated layer distinctively affected final properties of top-coated layer. Tg was found to be the most influencing factor on the print mottle of coated paper: the SB latex with lower Tg and higher particle size resulted in a superior print mottle.
These results indicate that final printability and properties of top-coated layer can be controlled by adjusting pre-coated layer.
목차
ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
인용문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-586-000824697