메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
강동규 (인하대학교 기계공학과) 이요한 (인하대학교) 박기정 (인하대학교) 정동수 (인하대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2011년도 하계학술발표대회
발행연도
2011.7
수록면
1,127 - 1,134 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this study, pool boiling heat transfer coefficients (HTCs) and critical heat fluxes (CHFs) are measured on a smooth square flat copper heater of 9.53 x 9.53 ㎜ at 6 0℃ in a pool of pure water. For flat heater experiments, a smooth flat surface and 26 fpi low fin are used to see the change in HTCs and CHFs according to the surface characteristics. HTCs are taken from 10 ㎾/㎡ to critical heat flux for all surfaces. Test results with low-fin surface showed that CHFs are greatly improved, as compared to that of a plain surface as various fluid velocities, 0.00, 0.10, 0.15, 0.20 ㎧, in pure water. The HTCs of tested each surfaces are increased over 5% up to 112% as fluid velocities at 0.10, 0.15, 0.20 ㎧ as compared to that of stoped water. Judging from these results, it can be said that low-fin tube with the variation of flow velocity of water can be used in heat transfer applications at high heat fluxes.

목차

ABSTRACT
1. 서론
2. 실험 장치 및 방법
3. 실험 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-553-000708688