지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.28 No.9
- 발행연도
- 2011.9
- 수록면
- 1,062 - 1,069 (8page)
이용수
초록· 키워드
오류제보하기
In electro-galvanizing line to manufacture the electro-galvanized steel sheet, polishing system is required to maintain clean surface of conductor roll and to secure the quality of the steel sheet. At the same time, prediction and decision of the replacement cycle for felt material and its brush installed in the polishing system is also important because the brush is directly contacted on the conductor roll surface. In this study, the polishing system has been designed which the brush is repetitive translating according to the longitudinal direction of the conductor roll. Furthermore, the prediction on the wear-life of the felt material used for the brush is performed using the contact pressure extracted by finite element analysis. And to verify the predicted wear-life of the felt material, the experimental study is also carried out. From the comparison result between the predicted and the measured wear-life of the felt material, it is presented that the wear-life and the replacement cycle of the felt material are well predicted by considering a wear compensation factor, and the wear compensation factor is useful and reasonable.
목차
1. 서론
2. 마모 모델
3. 유한요소해석을 통한 접촉압력 예측
4. 브러쉬 펠트 소재 마모 실험
5. 결론
후기
참고문헌
참고문헌 (16)
참고문헌 신청
Hayashi, H / 1994 / Recent trands insheet metals and their formability in manufacturingautomotive panels / Journal of Materials ProcessingTechnology 46(3):455~487
Jiang, H., M / 2004 / Forming characteristics and mechanical parametersensitivity study on pre-phosphated electrogalvanizedsheet steel / Journal of MaterialsProcessing Technology 151(1):248~254
Tang, L / 2010 / An efficient optimalsolution to the coil sequencing problem in electrogalvanizingline / Computers and OperationsResearch 37(10):1780~1796
Archard,J.F / 1953 / Contact and Rubbing of FlatSurfaces / Journal of Applied Physics 24(8):981~988
Hambli,R / 2001 / Blanking tool wear modeling using thefinite element method / International Journal ofMachine Tools & Manufacture 41(12):1815~1829
Jiang, H., M / 2004 / Forming characteristics and mechanical parametersensitivity study on pre-phosphated electrogalvanizedsheet steel / Journal of MaterialsProcessing Technology 151(1):248~254
Tang, L / 2010 / An efficient optimalsolution to the coil sequencing problem in electrogalvanizingline / Computers and OperationsResearch 37(10):1780~1796
Archard,J.F / 1953 / Contact and Rubbing of FlatSurfaces / Journal of Applied Physics 24(8):981~988
Hambli,R / 2001 / Blanking tool wear modeling using thefinite element method / International Journal ofMachine Tools & Manufacture 41(12):1815~1829
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-555-000313569