지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Recently, several vector hysteresis models such as vector Preisach, vector Jiles-Atherton and dynamic E&S model have been proposed to describe vector magnetic properties of electrical steel sheets. However, it is still difficult to find an adequate vector hysteresis model in finite element application for both the Non-oriented and Grain-oriented electrical steel sheets under alternating and rotating field conditions. In this paper, an improved E&S vector hysteresis model is suggested to describe the vector magnetic properties of both Non-oriented and Grain-oriented electrical steel sheets under various magnetic field conditions including alternating and rotating magnetic field conditions. The validity of the proposed model is tested through comparisons with the experimental results under various magnetic field conditions.
목차
Abstract
1. 서론
2. 종래의 E&S Vector Hysteresis 모델
3. 개선된 E&S Vector Hysteresis 모델
4. 모델링 결과
5. 결론
감사의 글
참고문헌
저자소개
참고문헌 (9)
참고문헌 신청
E. Dlala / 2010 / Improving loss properties of the Mayergoyz vector hysteresis model / IEEE Trans. on Magnetics 46(3):918~924
J. V. Leite / 2004 / Inverse Jiles-Atherton vector hysteresis model / IEEE Trans. on Magnetics 40(4):1769~1775
N. Soda / 2000 / Improvement of T-joint part constructions in three-phase transformer core by using direct loss analysis with E&S model / IEEE Trans. on Magnetics 36(4):1285~1288
M. Enokizono / 2002 / Designing a low-loss induction motor considering the vector magnetic properties / IEEE Trans. on Magnetics 38(2):877~880
고창섭 / 200811 / An Improved Engineering Model of Vector Magnetic Properties of Grain-Oriented Electrical Steels / IEEE TRANSACTIONS ON MAGNETICS 44(11):3181~3184
J. V. Leite / 2004 / Inverse Jiles-Atherton vector hysteresis model / IEEE Trans. on Magnetics 40(4):1769~1775
N. Soda / 2000 / Improvement of T-joint part constructions in three-phase transformer core by using direct loss analysis with E&S model / IEEE Trans. on Magnetics 36(4):1285~1288
M. Enokizono / 2002 / Designing a low-loss induction motor considering the vector magnetic properties / IEEE Trans. on Magnetics 38(2):877~880
고창섭 / 200811 / An Improved Engineering Model of Vector Magnetic Properties of Grain-Oriented Electrical Steels / IEEE TRANSACTIONS ON MAGNETICS 44(11):3181~3184
이 논문의 저자 정보
이 논문과 함께 이용한 논문
배전용 몰드변압기의 표유부하손 계산과 저감에 대한 연구
김성식
,
황성률
,
김영배
외 1명
대한전기학회 학술대회 논문집
2016
.03
The Estimation Method Comparison of Iron Loss Coefficients through the Iron Loss Calculation
Yong-Tae Kim
,
Gyu-Won Cho
,
Gyu-Tak Kim
Journal of Electrical Engineering & Technology
2013
.11
IPMSM의 철손계수 산정방법에 따른 철손오차 비교 및 분석
김용태
,
김동영
,
조규원
외 1명
대한전기학회 학술대회 논문집
2013
.04
전기기기의 철손 수식화를 위한 시스템 로스 계산
조규원
,
김규탁
대한전기학회 학술대회 논문집
2013
.04
수정된 Steinmetz 방정식을 이용한 IPMSM의 철손 산정
우석현
,
조규원
,
장기봉
외 1명
대한전기학회 학술대회 논문집
2011
.10
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-560-000312283