지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
This paper deals with the method and algorithm used to find fault locations in gas insulated transmission line. The method uses UHF sensors and digital oscilloscope to detect discharge signals emitted to the outside through insulating spacer in the event of breakdown inside GIL. UHF sensors are the external type and installed at outside of insulating spacers of GIL. And we used wavelet signal processing to analyze the discharge signals and confirm the exact fault location findings in the GIL test line.
This method can overcome demerit of TDR(Time Domain Reflectometer) method having been applied to detect fault location for conventional underground transmission lines, and Ground Fault Sensors used in conventional GIS systems. TDR method requires high level of specialty and experience in analyzing the measured signals. Ground fault sensors are installed inside GIL and can be destroyed by high transient voltage.
This paper’s method can simplify the fault location process and minimize the damage of sensors. In addition, this method can estimate the fault location only by the time difference when discharge signals are arrived to detecting sensors at the ends of GIL sections without reasons of breakdown.
To test the performance of our method, we installed sensors at the ends of test line of GIL(84m) and sensed discharge signals occurred in GIL, energized with AC voltage generator up to 700㎸.
This method can overcome demerit of TDR(Time Domain Reflectometer) method having been applied to detect fault location for conventional underground transmission lines, and Ground Fault Sensors used in conventional GIS systems. TDR method requires high level of specialty and experience in analyzing the measured signals. Ground fault sensors are installed inside GIL and can be destroyed by high transient voltage.
This paper’s method can simplify the fault location process and minimize the damage of sensors. In addition, this method can estimate the fault location only by the time difference when discharge signals are arrived to detecting sensors at the ends of GIL sections without reasons of breakdown.
To test the performance of our method, we installed sensors at the ends of test line of GIL(84m) and sensed discharge signals occurred in GIL, energized with AC voltage generator up to 700㎸.
목차
Abstract
1. 서론
2. GIL 절연파괴 위치추정 방법 검토
3. 실증시험을 통한 GIL 절연파괴 위치 추정
4. 결론
참고문헌
저자소개
참고문헌 (2)
참고문헌 신청
이 논문의 저자 정보
이 논문과 함께 이용한 논문
GIS 부분방전 진단을 통한 PD발생 위치 추적 방법
최문규
,
김병헌
,
김계배
외 3명
대한전기학회 학술대회 논문집
2012
.07
Reducing the Search Space for Pathfinding in Navigation Meshes by Using Visibility Tests
Hyungil Kim
,
Kyeonah Yu
,
Juntae Kim
Journal of Electrical Engineering & Technology
2011
.11
열차추진시스템에서 Switched Reluctance Motor의 속도제어를 위한 제어기 설계
김성수
,
김민석
,
이종우
전기학회논문지 P
2011
.09
차단기와 리클로져의 통신을 이용한 루프 배전계통의 보호협조 적용시 신뢰도 비교에 관한 연구
이희태
,
문종필
전기학회논문지 P
2011
.09
정착시간과 레귤레이션 특성을 개선한 LDO(Low Dropout Regulator)의 설계
박경수
,
박재근
전기학회논문지 P
2011
.09
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2012-560-004202882