지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
This paper proposes a finite element method (FEM)-based model of an interior permanent magnet (IPM) type BLDC motor having stator inter-turn faults. For more realistic simulation studies, the magnetic non-linearity is also considered in proposed model. And the simulation data are verified through experiment. By integrating the developed model with a current-controlled voltage source inverter (CCVSI) model, the characteristics of an inter-turn fault operated by six-switched inverter are investigated considering the speed control. And the circulating current, which is induced by magnetic linkage flux originated from PM, was analyzed from the view point of distortion of air-gap magnetic flux distribution caused deterioration of their torque.
목차
Abstract
1. 서론
2. 고정자 절연파괴 모델링
3. 분석 결과
4. 실험 결과
5. 결론
감사의 글
참고문헌
저자소개
참고문헌 (6)
참고문헌 신청
허진 / 200806 / Characteristic analysis of interior permanent-magnet synchronous motor in electrohydraulic power steering systems / IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS 55(-):2316~2323
A. Jack / 1996 / A comparative study of permanent magnet and switched reluctance motors for high-performance fault tolerant applications / IEEE Trans. on Industry Applications 32(4):889~895
Young-kook Lee / 2007 / A Stator turn fault detection method and a fault tolerant operating strategy for interior PM synchronous motor drives in safety-critical applications
S. B. Lee / 2003 / A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix / IEEE Trans. Power Electronics 18(3):865~872
B. VASEGHI / 2008 / Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding Inter-turn Fault / IAS Annual Meeting
A. Jack / 1996 / A comparative study of permanent magnet and switched reluctance motors for high-performance fault tolerant applications / IEEE Trans. on Industry Applications 32(4):889~895
Young-kook Lee / 2007 / A Stator turn fault detection method and a fault tolerant operating strategy for interior PM synchronous motor drives in safety-critical applications
S. B. Lee / 2003 / A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix / IEEE Trans. Power Electronics 18(3):865~872
B. VASEGHI / 2008 / Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding Inter-turn Fault / IAS Annual Meeting
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2012-560-004357851