메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
당중덩 (경북대학교) 김영호 (경북대학교) 최진호 (경북대학교) 김환곤 (경북대학교) 이상학 (경북대학교) 김규만 (경북대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집
발행연도
2010.11
수록면
4,161 - 4,164 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A microfluidic synthetic device using polydimethylsiloxane (PDMS) has been devised to fabricate microsized hydrogel particles. In the microfluidic synthetic device, micro-droplets of poly(ethylene glycol) (PEG) hydrogle were successfully prepared by adjusting flow rate ratios between hydrogel liquid flow and mineral oil flow as a sheath flow. By UV irradiation, the prepared micro-droplets were cured and produced microsphere in the range of 40 ㎛ to 200 ㎛ in diameter according to the flow rates. Especially the size variation of the fabricated hydrogel microspheres was very low such as monosized particles. Various experimental parameters that influence on the preparation of hydrogel microspheres including microfluidic channel geometry with various channel diameters, flow rate of hydrogel solution or mineral oil and surfactant concentration were investigated and optimized. Then silver nanoparticle laden hydrogel microspheres had been fabricated by the microfluidic synthetic method.

목차

Abstract
1. Introduction
2. Fabrication
3. Results and discussions
4. Conclusion

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-550-003944521