메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이기우 (한국에너지기술연구원) 권연상 (유나티앤이) 임병덕 (유나티앤이)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집
발행연도
2010.11
수록면
2,590 - 2,595 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
About 15% of sunlight energy incoming to solar cell is converted into electrical energy, and the remainder of absorbed energy is converted into thermal energy. Solar cell efficiency is generally decreased if the junction temperature is increased. Solar cell system must be designed for the increase of efficiency by the effective cooling. In this study, heat pipe with mesh wick is used for heat sink cooling the solar cell. Working fluid in heat pipe heat sink attached to solar cell panel, which the length is 76.9 cm and inclination is 60 degree, must be returned to the top part for continuous operation. So the flow length of working fluid in heat pipe was changed by partition, and the maximum capillary heat quantity and fin length were designed according to the length of partition and mesh number by theoretical analysis, and the temperature of heat pipe heat sink was measured by experiment according to heating quantity.

목차

Abstract
1. 서론
2. 접점온도에 따른 발전효율 및 판형 히트파이프 설계 이론
3. 히트싱크유무에 따른 변환효율 및 온도분포 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-550-003941419