메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박한빛 (한밭대학교) 윤린 (한밭대학교) 김영득 (인덕대학교) 이성재 (인덕대학교) 최석동 (대영 E&B)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집
발행연도
2010.11
수록면
2,525 - 2,530 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The usage of the CO₂ water heater has been increased due to its environmental friendly characteristics and the higher water temperature compared to that of conventional refrigerant. Also, it has lower running cost and higher system efficiency compared to the gas-fired water heater. In this study, the basic design for the Co2 water heater of which the compressor power consumption of 10HP is conducted. The CO2 water heater is composed of a compressor, a gas cooler, an expansion device, an internal heat exchanger(IHX), and a water reservoir tank .The mass flow rate, the discharge temperature and the pressure were calculated by using the efficiency model of the compressor. The rotation speed and the sweep volume for the compressor is obtained from the Dorin semi-hermetic 8㎾ compressor. The gas cooler and the IHX were designed by the ε-NTU method, which is applied to the finite volume. The capacity of them was calculated through the CO2 mass flow rate and the assumed inlet and outlet temperature. The evaporator was designed by the EVAP-COND under the various outside temperatures.

목차

Abstract
1. 서론
2. 연구방법
3. 결과 및 고찰
결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-550-003941313