메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
최종대 (서울과학기술대학교) 지인혁 (서울과학기술대학교) 조영학 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2010년도 동계학술발표대회 논문집
발행연도
2010.11
수록면
607 - 611 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Pressure drop of pure DI water and Al₂O₃ nanofluid was measured for rectangular shaped microchannels with hydraulic diameters of 100, 133, and 160 ㎛ in this study. Using a commercial CFD simulation package, microchannels were designed and the channels were manufactured by a MEMS fabrication process. The measurement was performed under laminar flow conditions with Reynolds number below 100 and the fluids were single-phase liquid. Al₂O₃ nanofluid was made by mixing DI water and nano particles with volume concentrations of 1, 5vol%. Experimental results showed that the pressure drop of pure DI water followed theoretical trends and values relatively well. The nanofluid pressure drop in microchannels was increased with the increase of nano particle concentration and the concentration effect was augmented as the hydraulic diameter was increased. Based on the measurement, nanofluid viscosity was calculated and its results presented that the relation between the viscosity change and nano particle concentration was not linear.

목차

ABSTRACT
1. 서론
2. 실험장치 및 실험방법
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-553-003955056