메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
안창윤 (한국 원자력 연구소) 오동준 (한국 원자력 연구소) 조선영 (한국 원자력 연구소) 박순삼 (한국 원자력 연구소) 임경수 (한국 원자력 연구소) 김영석 (한국 원자력 연구소)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2001년도 제2차 재료 및 파괴부문 학술대회 논문집
발행연도
2001.8
수록면
98 - 105 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
One of the most important safety requirements the CANDU Zr-2.5Nb pressure tube shall meet during its life time is a leak-be fore-break (LBB) criterion whose safety margin is governed by delayed hydride cracking velocity and fracture toughness. Zr-2.5Nb pressure tube used currently in CANDU reactors is very susceptible to delayed hydride cracking, causing many failures and replacements of pressure tubes. The objective of this study is to characterize the delayed hydride cracking of different pressure tubs such as CANDU and TMT-l. This study has reported the DHC characteristics of Zr-2.5Nb pressure tubes obtained using the qualified DHC test procedure set-up through the IAEA round robin test on DHC with curved compact toughness specimens. DHC velocities were measured and compared at temperature ranging from 144℃, 182℃ to 250℃. After DHC testing, fracture surface were investigated with a stereoscope. DHC velocities were increased with temperature and DHCV of TMT-I pressure tube was slower than that of CANDU pressure tube. And the effects of yield stress and texture on the DHCV were discussed.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002784467