메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
We developed a new continuous-expansion-type of condensation nucleus counter (CNC) using a capillary nozzle and examined its performance. The numerical results of particle growth in choked capillary nozzle flow shows that the particle size at the nozzle exit can be easily predicted by calculation of three major parameters; flow parameter, growth parameter, and heating parameter (Jeong et al., 2000, JSME Int. J. Series B Fluids and Thermal Engineering 43, 590-595). We controlled these parameters by changing temperature of the saturator and dimension of the capillary and examined the effect of these parameters. The count efficiency of the prototype CNC at various conditions was compared with that of TSI-3010 Condensation Particle Counter (CPC). The count efficiency of the prototype decreases with decrease of the seed particle size relatively. However, the efficiency of the prototype for 10㎚ of the seed particle does not go down so much as that of TSI-3010 does, while the count efficiency of TSI-3010 drastically decrease at 10㎚ (Quant et al. 1992) The efficiency of the capillary whose length is 175㎜ is lower than that of 125㎜ length capillary with same diameter. This shows that the flow parameter more significant for the particle growth in capillary as shown in analysis of Jeong et al. (2000).

목차

Abstract
1. 서론
2. 실험 장치 및 실험 방법
3. 결과 및 토론
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003001790