메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
오세두 (성균관대학교) 정성훈 (성균관대학교) 안태식 (성균관대학교) 박정민 (성균관대학교) 조성욱 (삼성전자) 이영제 (성균관대학교)
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 2006년도 제42회 춘계학술대회
발행연도
2006.6
수록면
168 - 172 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The CO₂ was investigated as an alternative refrigerant to replace HFC (hydrofluorocarbons) refrigerant in air conditioning systems due to the environmental concerns. Because new compressors with CO₂ are going to be operated under the high pressure, the tribology of sliding surfaces in the compressor becomes very important. To develop new compressor, especially rotary type, the friction and wear characteristics of sliding surfaces between a vane and a roller in the rotary compressor were evaluated in this paper. Several hard coatings, such as TiN, CrN and WC/C, were applied on vane surfaces in order to improve the tribological characteristics, and their performances were evaluated experimentally. Two types of lubricants were used, namely POE (polyol ester) oil and PAG (polyalkylene glycol) oil. The vane-on-disk type sliding tests were performed with an exclusive high pressure wear tester. From the tests, wear volumes of vane surfaces applied various coatings were compared. Test results showed that WC/C and CrN coatings showed good tribological properties. Also, the results of the sliding tests showed that using PAG oil has an advantage over POE oil in CO₂ environment.

목차

ABSTRACT
1. 서론
2. 실험 방법
3. 실험결과 및 토의
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002353849