메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Yang-Bok Lee (고려대학교) Dae-Soon Lim (고려대학교)
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 2007년도 제45회 추계학술대회 및 자동차트라이볼로지 한.중 심포지엄/정기총회
발행연도
2007.11
수록면
249 - 262 (14page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, the tribological properties of acrylonitrile-butadiene rubber (NBR) filled with two kind of carbon black and nano-diamond filler were investigated. The dry sliding wear experiments were conducted on NBR specimens at constant load, 3 N, and sliding speed, 21.98 m/min with steel(Suj2) ball using a ball-on-disk method. The wear tracks of the NBR specimens were observed with scanning electron microscopy (SEM). The hardness was measured to examine the correlation between the effects of carbon black and nano-diamond on the mechanical and tribological properties of the NBR specimens. Carbon black particles used different size of Semi-Reinforcing Furnace(SRF), and High Abrasion Furnace(HAF). The tribological result of the NBR specimens showed increased HAF ratio with decreased wear rate. However, friction coefficient of NBR specimens increased with increasing of HAF ratio. So, we propose fabrication of the NBR specimens filled with less than 1wt% nano-diamond. The tribological results of the NBR specimens filled with 0.5wt% nano-diamond showed most decreasing of wear rate and friction coefficient.

목차

ABSTRACT
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002326593