메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이봉수 (한국기기유화시험연구원) 정철영 권오용 고희환
저널정보
한국유체기계학회 한국유체기계학회 학술대회 논문집 유체기계공업학회 2008 유체기계 연구개발 발표회 및 정기총회
발행연도
2008.12
수록면
273 - 277 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to estimate the flow rate by measuring the thrust under the premise that the kinetic energy which leads to fluid flow is the same as the thrust of jet fan. The values measured in the multi-nozzle chamber were 12.94 ㎥/min in 2810 rpm and 15.98 ㎥/min in 3370 rpm. Compared with the values measured in multi-nozzle chamber, the measurement results by the load cell in 3370 rpm in the case of structure type showed the difference of about 5.5 % and about 8.5 % in 2810 rpm, and within 3.5 % in both revolution numbers in the case of rope type. The thrust force showed higher value when vibration of load cell was being measured. There appears slight displacement value of the load cell by vibration and this displacement value is affecting the measurement value of thrust force. As a result of measuring the vibration, it was found that the vibration was repeating. Therefore, the dynamic correction of the load cell and the vibration correction coefficient are necessary to obtain the exact thrust value.

목차

ABSTRACT
1. 서론
2. 제트팬 운동량
3. 시험장치 및 방법
4. 시험결과 및 고찰
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-554-002514645