메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한건축학회 대한건축학회 학술발표대회 논문집 - 구조계 대한건축학회 2008년도 학술발표대회 논문집 - 구조계 제28권 제1호
발행연도
2008.10
수록면
427 - 430 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study investigated the fire-resistant characteristic of high strength concrete according to the change of the thickness and the adhesive method of fireproof plaster board and the results are summarized as followings. From the characteristic of fresh concrete, both slump flow and air content were appeared to satisfy each target range and the compressive strength appeared the range of high strength as 89.9 MPa from the characteristic of hardened concrete. From the characteristic of spalling, at all specimens of which the upper side finishing was not performed, the severe spalling that all covered concretes on 4 sides were felled off and internal reinforcing bars were exposed was occurred and spalling was appeared to occur even to the internal concrete. But, in case of specimen of which the upper side finishing was performed, spalling was not occurred. As the highest temperature of reinforcing part of each test after fire-resistant test, 19F1-MN-N showed l036℃ and 19F1-MN-T showed 272℃. 19F1-ML-T that had grouted lightweight mortar appeared the most excellent capability as 116℃. As for mass loss rate after fire-resistant test, 19F1-MN-N appeared the most mass loss rate as 27% but specimen of which the upper side was finished appeared the low mass loss rate as around 7%.

목차

Abstract
1. 서론
2. 실험 계획 및 방법
3. 실험결과 및 분석
4. 결론
감사의 글
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-540-001657276