메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Tae Young Kim (한국과학기술원) Sung Jin Kim
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
2,176 - 2,181 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the characteristics of pressure loss generated between an impinging jet nozzle tip to ambient air and the sensitivity of an imaging technique based on the impinging jet are studied. Distance-flow impedance curves were experimentally obtained using aluminum alloy probes. Based on the experiments a correlation was proposed to predict the pressure loss generated when air flows through a millimeterscale or microscale nozzle with a constant flow rate. The sensitivity and the vertical resolution of the scanning flowimpedance microscope (SFIM) are also studied based on the proposed correlation. Using this correlation, the flow-impedance data obtained by scanning a probe over the specimen can be converted into the topographical information of the specimen. SFIM micrographs are also presented.

목차

Abstract
1. Introduction
2. Experimental setup
3. Pressure loss characteristics of an impinging jet issuing from a nozzle
4. Sensitivity and vertical resolution of SFIM
5. Conclusions
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019133257