메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이세권 (한국항공대학교) 곽호협 부준홍 (한국항공대학교) 김종규 강용혁
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
1,645 - 1,650 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An experimental investigation was conducted on a heat pipe for application in a thermal storage system consisted of a phase-change material (PCM) at around 340℃. The working fluid was Dowtherm-A and the screen mesh wick as well as the container was made of stainless steel. Since the PCM should be located in the middle section of the heat pipe configured vertically, and only one of the two extruded ends of the heat pipe should function, either as an evaporator or a condenser, during the heat charge and dissipation mode, the initial fluid charge should be higher than the evaporator length located at the bottom of PCM. The total length and the outer diameter of the heat pipe were 1 m, and 25.4 ㎜, respectively. The thermal performance of the heat pipe was presented in terms of the thermal resistance, the heat transfer coefficient, and the effective thermal conductivities as functions of operating temperature and heat flux.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019124241