메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한토목학회 KSCE JOURNAL OF CIVIL ENGINEERING KSCE JOURNAL OF CIVIL ENGINEERING Vol.10 No.1
발행연도
2006.1
수록면
47 - 52 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper reviews the sampling error formalism by North and Nakamoto (1989), North et al. (1991), and Yoo (2000) to provide an idea of optimal sampling design for rainfall field. Rain gauge networks, a line of rain gauges, microwave attenuation measurements, and satellite measurements are evaluated. Combined sampling cases using any two different sampling methods are also evaluated. All cases are applied to the GATE Phase I data, the same as in North and Nakamoto (1989), for the comparison. Summarizing the results is as follows. (1) Without any consideration of heterogeneities like orographic effect or diurnal cycle, the most economical rain gauge network becomes to use evenly spaced 16 gauges or satellite sampling every 24 hours for the sampling of 500km x 500㎞ area of GATE. For both cases the sampling error was estimated to be about 10% of standard deviation of areal average values. (2) The sampling error could be decreased significantly for the combined sampling of two different sensors, especially when they satisfy the condition for design orthogonality. For example, the sampling error is decreased up to 50% by combining the evenly spaced 16 rain gauges with satellite sampling every 24 hours.

목차

Abstract
1. Introduction
2. Sampling Errors from Various Observation Design
3. Combined Sampling Designs
4. Comments on Optimal Sampling Design
5. Summary and Conclusion
Acknowledgements
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-531-019092014