메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
鄭在甲 (한국표준과학연구원) 李相和 (한국표준과학연구원) 姜銓洪 (한국표준과학연구원) 金明壽 (한국표준과학연구원) 金潤亨 (충남대학교) 韓相吉 (충남대학교) 韓相玉 (충남대학교)
저널정보
대한전기학회 전기학회논문지 P 전기학회논문지 제57P권 제1호
발행연도
2008.3
수록면
6 - 13 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
National standard system for calibrating current transformer(CT) up to primary current of 20,000 A have been established. The system consists of 20,000 A AC high current source, CT comparator, standard CT, CT under test and CT burden. An AC high current is applied to the primary windings of both the standard CT and the CT under test, and then the CT comparator measures the ratio error and the phase displacement by comparing the secondary currents of the two transformers. As a validity check for 20,000 A CT calibration system, the comparison with the two national standard institutes(NMIs) has been performed using same CTs. The comparison results of the CTs are consistent with those measured at two NMIs within 0.004 % for ratio error and 0.1 min for phase displacement in the primary current ranges of Ip = 10 - 20,000 A with a secondary current of Is = 5 A.

목차

Abstract
1. 서론
2. 교류 대전류 20,000 A 시스템의 구성 및 사양
3. 20,000 A 대전류 시스템의 시험거동
4. 국제 비교측정을 통한 시스템의 성능평가
5. 결론
감사의 글
참고문헌
저자소개

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-018845238