메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2008년도 열공학부문/유체공학부문 춘계학술대회 논문집
발행연도
2008.4
수록면
207 - 211 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The heat transfer characteristics of an unconfined slot air jet for compressible and incompressible flow impinging on a heated flat plate have been investigated experimentally. The influence of the Reynolds number and the nozzle-to-plate spacing on the Nusselt number was studied. The variable parameters in the experiment were a jet width (0.25 ㎜), the Reynolds number (150~5000), the dimensionless nozzle-to-plate spacing (Z/B = 1~20). The results showed that the thermal characteristics of the micro-scale impinging jet are similar to those of the macro-scale impinging jet. At a low Reynolds number of Re s 2500, (1) the heat transfer distribution for nozzle-to-plate spacing was observed non-monotonic behavior which has a peak due to the opposite influences of turbulence intensity and diminished jet velocity, (2) the turbulence intensity peak moves from Z/B = 12 to 3 with increasing the Reynolds number. At a high Reynolds number of Re ~ 3250, (3) the maximum heat transfer occurs at Z/B = 3 due to the turbulence intensity and compressibility of jet air.

목차

Abstract
1. Introduction
2. Experimental apparatus and procedures
3. Data analysis and reduction
4. Results and discussion
5. Conclusion
Acknowledgement
Reference

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-018670220