메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박찬익 (서울대학교) 정훈의 (서울대학교) 이성훈 (서울대학교) 조혜성 (서울대학교) 서갑양 (서울대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2008년도 마이크로/나노공학부문 춘계학술대회 강연 및 논문집
발행연도
2008.5
수록면
248 - 251 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Wettability can be controlled by using different physical geometries for a given material, in which micro-or nanostructured surface are typically used. However, stability of a water droplet is heavily affected by structural parameters including width, spacing and height of micro features. Here, we present designing criteria for water wetting by fabricating two surfaces of different hydrophilicity and by analyzing wettability of micro-textured surfaces with various geometrical factors. We used PDMS for hydrophobic polymer and NOA 73 for hydrophilic polymer. Patterns are 5 ㎛ diameter circular pillars with space varying from 5 ㎛ to 50 ㎛ (Spacing/Diameter ratio varies from 1 to 10) and height varying from 5 ㎛ to 25 ㎛ (Height/Diameter ratio varies from 1 to 5). We measured water contact angle and analyzed with non-dimensional geometrical parameters. Water droplet transits from Cassie-Baxter state to Wenzel state as spacing ratio gets larger and height ratio gets smaller. Some theoretical discussions are presented to explain how and when wetting transition occurs.

목차

Abstract
1. Introduction
2. Experiments
3. Results and Discussion
4. Summary
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-018644224