메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국표면공학회 한국표면공학회지 한국표면공학회지 제42권 제4호
발행연도
2009.8
수록면
157 - 160 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Many fundamental studies have been carried out regarding waste water and hazardous gas treatments technologies using the photolysis effect of TiO₂. However, a permanent use of TiO₂ particles immobilized using organic or organic-inorganic binders is impossible. In this study, Ni-TiO₂ composite coating was produced by electroless plating to trap TiO₂ particles in the Ni coating layer. The electroless plating was performed in the bath solutions with three different concentrations of TiO₂ particles : 10 g/l, 20 g/l, and 40 g/l. The surface and photolytic characteristics of the coating layer was investigated by the use of SEM, a scratch tester, and an UV-Visible spectrophotometer. The results showed that the amounts of immobilized TiO₂ particles and the photolytic rate of the coating increased with the initial content of TiO₂ particles in the electroless bath. In addition, the photolytic rate of the Ni-TiO₂ composite coating was remarkably promoted by etching process in 10% HCl solution.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-581-018640192