메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 대한기계학회 논문집 B권 대한기계학회논문집 B권 제32권 제11호
발행연도
2008.11
수록면
824 - 831 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
We present a continuous size-dependent particle separator using a negative dielectrophoretic (DEP) virtual pillar array. Two major problems in the previous size-dependent particle separators include the particle clogging in the mechanical sieving structures and the fixed range of separable particle sizes. The present particle separator uses the virtual pillar array generated by negative DEP force instead of the mechanical pillar array, thus eliminating the clogging problems. It is also possible to adjust the size of separable particles since the size of virtual pillars is a function of a particle diameter and applied voltage. At an applied voltage of 500 ㎑ 10 V<SUB>rms</SUB> (root mean sqaure voltage) sinusidal wave and a flow rate of 0.40 ㎕ min?¹, we separate 5.7 ㎛-, 8.0 ㎛-, 10.5 ㎛-, and 11.9 μm-diameter polystyrene (PS) beads with separation purity of 95%, 92%, 50%, and 63%, respectively. The 10.5 μm- and 11.9 μm-diameter PS beads have relatively low separation purity of 50% and 63%. However, at an applied voltage of 8 V<SUB>rms</SUB>, we separate 11.9 ㎛-diameter PS beads with separation purity over 99%. Therefore, the present particle separator achieves clog-free sizedependent particle separation, which is capable of size tuning of separable particles.

목차

Abstract
1. 서론
2. 동작 원리
3. 설계 및 제작
4. 성능 시험 및 토의
5. 결론
후기
참고문헌
부록

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0