메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국대기환경학회 한국대기환경학회지(국문) 한국대기환경학회지 제24권 제4호
발행연도
2008.8
수록면
415 - 422 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study was carried out to investigate the effect of operating and design conditions of gas dispersion type of absorber on SO₂ removal efficiency. pH difference between upper and lower part of gas dispersing plate of absorber was 0.2, which was relatively low. This was supposed that recirculation capacity of absorbing liquid between froth zone and reaction zone of absorber be increased by oxidation air injection through liquid riser which acted as liquid pump. Test results showed that SO₂ removal efficiency was more sensitive than absorber ΔP. High SO₂ removal even at lower pH resulted from very low concentration of HSO₃ - ion in absorbing liquid because of direct supply of dissolved oxygen into froth zone. 96% of SO₂ removal efficiency was obtained under the condition of absorber pH 5.2, flue gas flow rate of 1,530 N㎥/hr, inlet SO₂ concentration of 800 ppm, absorber ΔP of 250 mmAq. The following equation by a multiple linear regression was obtained to describe the relationship between SO₂ removal and operating variables.
f=1-exp(-1.3939+1.060 pH+0.0139ΔP-0.00267G-0.000064SO₂Conc.), R²=0.9719

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0