메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2005年度 秋季學術大會 論文集
발행연도
2005.12
수록면
221 - 225 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
In this paper, creep tests of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloy casted by mold under the temperature range of 200-300℃, and the stress range of 2.39-7.96㎏<SUB>f</SUB>/㎟ were done with the automatic controlled temperature and computer for data acquisition. The activation energies were obtained by relationship between creep rate and temperature, and the stress exponents were obtained by relationship between creep rate and stress. From the experiment results, the activation energies of Mg-Zn-Mn and Mg-Zn-Mn-Ca alloy were 149.87kJ/㏖, 147.97kJ/㏖, respectively, and the stress exponents of those alloy were 5.13, 5.59, respectively ,under the temperature of 200-220℃ and 6.37-7.96㎏<SUB>f</SUB>/㎜2. And the activation energies of those alloy were 134.41kJ/㏖, 129.22kJ/㏖, respectively, and the stress exponent of those alloy were 3.48, 3.77, respectively, under the temperature of 280-300℃ and 2.39-3.98㎏<SUB>f</SUB>/㎜2. In addition, the activation energy decreased with increasing applied stress, and stress exponent decreased with increasing temperature. Finally surface fractured was showed grain and dimple behavior by SEM.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고 문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014982212