지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
이 논문의 연구 히스토리 (3)
2002
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature (55℃) compared to conventional phosphating temperature (80~90℃). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015% (w/w) and 2.0 g/l, respectively. The coating weight was within the range of 15~20 g/㎡. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be 6~10 g/㎡ and the lubricated panel revealed excellent lubricating properties.
목차
Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
냉간 가공용 인산염 피막처리의 저온화에 관한 연구
한국표면공학회지
2002 .10
-
Deposition Tribology of Nano-period Solid Lubricating Lubricating Films
한국트라이볼로지학회 학술대회
2002 .10
-
The lubricating effects of Fe₂O₃ thin films under CO₂ environment
한국트라이볼로지학회 학술대회
2002 .10
-
Tribological Evaluation of Self-Lubricating Material
한국트라이볼로지학회 학술대회
2015 .04
-
A new method to estimate rheological properties of lubricating layer for prediction of concrete pumping
Advances in concrete construction
2018 .01
-
Numerical Design Method for Water-Lubricated Hybrid Sliding Bearings
International Journal of Precision Engineering and Manufacturing
2008 .01
-
Formation of Self-Lubricating Films on Al Using Plasma Electrolytic Oxidation Method
한국표면공학회 학술발표회 초록집
2008 .06
-
TRIBOLOGICAL PROPERTIES OF BIODEGRADABLE LUBRICATING OILS IN FOUR-BALL TEST
한국트라이볼로지학회 학술대회
2002 .10
-
유체류에 대한 검증특성 고찰
한국에너지학회 학술발표회
2017 .09
-
수윤활 스테인레스강 볼베어링의 고온 마찰 특성
한국트라이볼로지학회 학술대회
2003 .11
-
철강 냉간 가공용 인사염 피막처리의 저온화에 관한 연구
한국표면공학회 학술발표회 초록집
1998 .11
-
A Parametric Study on the Characteristics of the Oil-Lubricated Wave Journal Bearing
KTS International Journal
2001 .06
-
Friction and Wear Analysis of Lubricated Contact within IC-Engines
한국트라이볼로지학회 학술대회
2010 .06
-
스테인레스강 볼베어링의 고온, 고압 수윤활 마찰 특성
한국트라이볼로지학회 학술대회
2004 .06
-
Shape Study of Wear Debris in Oil-Lubricated System with Neural Network
KTS International Journal
2001 .06
-
경유의 윤활특성 ( Lubricating Characteristics of Diesel Fuel )
Tribology and Lubricants
2000 .10
-
윤활면의 초기작동과정에 관한 연구 ( The ` Breaking-In ` of Lubricated Surfaces )
대한기계학회 춘추학술대회
1985 .01
-
Vibration Reduction Effects of Lubricating-oil With or Without Additive in Rolling Bearing
한국소음진동공학회 국제학술발표논문집
1997 .01
-
Vibration Reduction Effects of Lubricating-Oil With or Without Additive in Rolling Bearing
Vibration Conference
1997 .11
-
Experimental Investigation of Porous Bearings Under Different Lubricant and Lubricating Conditions
Journal of Mechanical Science and Technology
2003 .09
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-581-014817815