메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第23卷 第11號
발행연도
2007.11
수록면
109 - 117 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study proposes a spalling mechanism based on the results of a fire resistance test of high strength concrete considering influential factors of spalling occurrence. The factors considered in this test are water to binder ratio (W/B), mineral admixture, air content, moisture content, aggregate existence and casting method. Totally fourteen specimens are set up with varying 2 or 3 other factors of each experimental factor. 0.05 vol.% of polypropylene fiber is added in all specimens, except for the centrifugal casting specimens. This fiber content is decided to compare the spalling appearance effectively. The results of the fire test showed that the specimen using coarse aggregate as a concrete condition exhibited the falling-off phenomena on surface area, while using only fine aggregate as a mortar condition indicated cross sectional spalling occurrence. Interestingly, one of the centrifugal casting specimens was protected from spalling. It was also found that spalling was not observed in those specimens without silica fume, containing 0% of moisture and having 10±0.5% of air. In this study, the hypothesis of vapor movement with time progressive at elevated temperature is suggested and then ultimately a new mechanism regarding the particular spalling phenomena, which has not been explained with previous studies, is proposed.

목차

Abstract
1. 서론
2. 폭렬에 관한 기존의 연구 및 폭렬에 미치는 콘크리트 공극구조
3. 실험계획 및 방법
4. 굳지않은 콘크리트 및 경화 콘크리트의 실험결과 및 분석
5. 폭렬발생에 미치는 영향요인 분석
6. 폭렬발생 메커니즘의 제안
7. 결론
감사의 글
참고문헌

참고문헌 (31)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-016084853